Skip to main content


Social Innovation

Hitachi Strives to Create New Nearly Permanent Digital Archive Technology Hitachi Strives to Create New Nearly Permanent Digital Archive Technology

  • R & D

Digitizing public documents and photographic images has become increasingly popular in recent years. However, current data storage media lasts less than 100 years and would not survive through fire or other disasters. To deal with this issue, Hitachi began research and development of nearly permanent digital archive technology.

Hitachi Sets Its Sights on Fused Silica Which Is Fire and Water Resistant

With the progress of information technology in our increasingly networked society, data storage has moved quickly from paper to floppy disks to optical disks to hard drives and a variety of other digital media. Demand is increasing for reliable new media that can preserve valuable data, such as public documents and historical information, as well as personal records for future generations. Although optical disks and hard drives have sufficient recording density, they don't have the required lifespan or durability. As such, Hitachi has been working on research and development of cutting-edge technology for nearly permanent digital archives.
The ultimate goal is to develop digital archives that have a nearly permanent life and can also withstand fluctuations in temperature and humidity as well as flood, fire and other external stresses. It is also important that the archives can be read without a specific device.
Hitachi finds that fused silica is a very promising material for recording media since it is chemically stable and highly resistant to heat and water, as well as being resistant to radiation.

Hitachi Achieves 300-million-year Data-storage Lifespan and Recording Density Comparable to Blu-ray Discs™

In 2008, Hitachi's Central Research Laboratory launched a research project to develop nearly permanent data storage as part of its "Innovation Research." In the following year, research results suggested that data recorded in fused silica could last for 300 million years.
In 2011, Hitachi launched a joint research project with Prof. Kiyotaka Miura and Yasuhiko Shimotsuma, Ph.D. from the Kyoto University School of Engineering to improve recording density and the reading process for data storage in fused silica. The technology uses a femtosecond pulse laser* to record data and an optical microscope to read the data. The femtosecond pulse laser employs a laser pulse of less than one ten-trillionth of a second to create dots with a different refractive index inside the fused silica to record digital data in multiple layers. The recorded dots represent ones, and the areas without dots represent zeroes. To read the data, an optical microscope scans layer by layer to read the configuration of recorded dots.

In 2012, the joint research project achieved a recording density comparable to a CD by recording four layers of data in fused silica. In 2013, the joint research project developed the technology to reach a recording density comparable to a DVD by recording 26 layers of data.
Dramatic innovations were needed in recording and reading data to achieve this level of density. The joint research project developed multi-layer recording technology and simultaneous multi-bit recording technology, using a spatial light modulator to enable high-speed and high-density recording. This makes it possible to simultaneously record around 300 bits of information. To improve recording density, the joint research project developed and used outline enhancing signal processing technology to reduce noise and artifacts from other layers.
Further, the joint research project proved that data recorded in fused silica was able to withstand accelerated temperature tests at 1,000 degrees Celsius for two hours and could have a nearly permanent life.

However, as the joint research project worked on increasing the number of layers to record to improve recording density, some unexpected issues arose. Recording more layers requires writing data deeper inside the fused silica, in layers that are only 60 micrometers apart. As data was recorded deeper inside the fused silica, the dots became distorted depth-wise, creating interference that caused errors in reading data from other layers. Another issue was that the dots recorded in deeper layers became less sharp when being read. These issues were due to spherical aberration caused by the difference between the refractive index of the air and that of the fused silica. The joint research project resolved these problems by using a spherical aberration correction lens, preventing the phenomena of elongation and blurring of the dots. To reduce reading errors and to meet reliability standards needed for practical application, the joint research project also developed and applied a new noise reduction algorithm. (See graphic 2)

Graphic 1: A femtosecond pulse laser and spatial light modulator are used for high-density, multi-bit recording

The laser creates dots to record data

An optical microscope is used to read the data, and a computer processes the image

The joint research project resolved the problems with multi-layer recording and succeeded in producing a prototype for 100-layer data storage in fused silica in 2014. This means that the joint research project proved that a nearly permanent life of 300 million years could be achieved for data storage at 1.5 GB/inch², which is comparable to Blu-ray discs™.
Possibilities still remain for further increasing of the number of layers.

femtosecond pulse laser : The duration of a laser beam firing is called its pulse width. A femtosecond pulse laser is a laser that has reduced the duration of its pulse to about one ten-trillionth of a second, 10-13 seconds, or less.

Graphic 2: The data reading process met standards for practical application through using a spherical aberration correction lens and other innovative methods

Hitachi Continues R&D to Preserve the Heritage of Human Civilization

Currently, there are research initiatives underway around the world to develop long-life data storage using various methods, including semiconductor memory and the DNA of bacteria. However, none of these efforts have even come close to being able to store data for 300 million years or withstand temperatures of 1,000 degrees Celsius that Hitachi's initiatives have achieved. Fused silica storage also has the added advantage that users can draw images, such as letters, artwork and photographs, by using dots in addition to storing digital data. In December 2014, a fused silica glass lithograph featuring images and a message for 300 million years in the future was created using this technology. These were launched into space on the Hayabusa 2 rocket as part of the payload for Shin-en 2, a small-sized space probe that was jointly developed by the Kyushu Institute of Technology and Kagoshima University.

Images in fused silica glass and a message for 300 million years in the future were sent into space aboard the Shin-en 2 probe

Hitachi considers that cultural heritage such as written language, paintings, photographs, and sound recordings are valuable assets that should be preserved for future generations. Hitachi continues to work on research and development to preserve such valuable data for close to eternity using materials that are highly resistant to heat and water, as well as being resistant to radiation.

Hitachi's Research and Development

Hitachi's Research and Development